For a change of pace, I thought I would post a pattern puzzle in the making. I don’t know how well or poorly it will come out but who cares? One manages to learn something in the process. It has been a good exercise to practice my pattern making skills with StyleCAD.
I don’t have a sketch of it either but one of you can create one from the pattern pieces if you’re so inspired. If your pattern skills are such that you can’t tell what it will look like yet, this should also be a learning experience for you too.
I started with a very plain block, a child’s size 5 dress (hopefully this will become a real dress and then a present for my niece). I picked a child’s dress for two reasons. One is to minimize fabric loss if this project ends up as a wadder (wadder=only suitable to wad into a ball and throw away). Two, I made one of these before for myself and it got very complex with darting and what not so this style won’t complicate things unnecessarily.
Step one: Lay the front and backs together, marrying the pieces along one side seam.
Step two: draw the spiral lines. The lines will become cut lines, where the pieces will be separated from each other. Gee, that notching tutorial I wrote last week will come in handy, eh?
Step three: Pick a line to cut along. An image of what I mean is above right. It’s rather small so see the larger file if needed.
Step four: join the removed piece to the opposite side so you end up with continuous spirals. If you haven’t figured it out by now, there will be no side seams per se. This is illustrated below.
Step five: The pattern is almost ready to split apart for the next step in the pattern process. Before you cut it apart, I suggest numbering each piece consecutively. It would be a good idea to notch them.
Specifically, this is an interim stage so your notching should be designed to assist you. For example, I did not come up with a final production notching scheme. I designed one that would help me do the next step. Specifically, I need to add fullness to these sections and since I want to control it carefully, notching pieces identically was more helpful to me than not (shown below). I’ll worry about how to notch it for sewing later. For now, I need to be able to line pieces up exactly.
Step seven: Now to add fullness to each section. Below you can see how I’ve split the first three sections down the center and pivoted the edges apart to create additional fullness along the hem line.
If you notice, the edges of the pattern above are slightly curved where as the edges between sections in step seven are perfectly straight. That’s because I do it a bit differently than how we’re taught in books. I think this way (above) is more elegant. More work certainly but more elegant. I have illustrated how to render this effect in the forum.
Anyway, this pattern is almost ready to do the fiddly portion. Namely, making facings, adding seam allowances, truing the seams for sewing, notching and all of that.